Binks 2100 Siphon Fed Spray Gun Cleaning Instructions – ICD High Performance Coatings + Chemistries

Basic cleaning instructions for a Binks 2100 siphon fed spray gun:

1. Detach cup from spray gun
2. Wipe the siphon tube clean
3. Spray water through the spray gun and back flush through the siphon tube
4. Repeat this process until water appears clean
5. Pour any leftover material back into the bucket
6. Thoroughly rinse out and clean the spray canister to eliminate any ability of cross contamination
7. Disassemble spray gun
8. Remove fluid adjustment screw
9. Remove needle
10. Remove air cap
11. Place air cap in a cup of warm water
12. Spray needle with isopropyl alcohol and wipe clean
13. If available, use the cleaning kit brushes that come with the spray gun
14. A soft bristle toothbrush can also work for cleaning
15. Brush and clean the air cap
16. If available, use the correct brush from the gun cleaning kit to run through the spray gun
17. A small pipe cleaner sprayed with isopropyl alcohol will also work
18. Assemble the spray gun back together
19. Screw on the air cap
20. Insert needle
21. Screw in fluid adjustment screw
22. Attach siphon cup
23. If available, refer to your spray equipment manual for further information

ICD formulates and manufactures water-based coatings, resins, and chemicals in the US Pacific Northwest. We believe the world is a better place when innovative, green, sustainable products are specified and utilized. To support this, we offer education that explores why product performance and material selection matter. We are seen as experts in silicone coating technology and provide sustainable solutions where none previously existed. Topics include ultra-low VOC’s, the difference between solvent-based and water-based formulations, how coatings can be developed for improved energy reduction in the fabrication